Public procurement as a driver of the circular economy: challenges and legal perspectives for sustainability in Brazil[1]

Contratações públicas como vetor da economia circular: desafios e perspectivas jurídicas para a sustentabilidade no Brasil

Renato Bernardi[2]

Sebastian Philip Lucena Person[3]

ABSTRACT

The socio-environmental crisis triggered by the linear economic model, which is based on extraction, production, use, and disposal, imposes an urgent transition to the circular economy, a restorative and regenerative paradigm. This study sought to investigate how public procurement in Brazil can overcome the dissonance between the constitutional duty to promote sustainable development and bidding practices. To this end, the use of state acquisitions to foster the circular economy was analyzed, grounded in the legal framework and in best practices. The study adopted the deductive method, guided by a qualitative approach to the data and documents examined. The conclusion is that the Brazilian legal system provides a solid foundation for the integration of the circular economy into government procurement, although cultural, technical, and operational challenges persist.

Keywords

public procurement — circular economy — linear economy — sustainable development — socio-environmental

RESUMO

A crise socioambiental provocada pelo modelo econômico linear, que se baseia na extração, produção, uso e descarte, impõe uma transição urgente para a economia circular, paradigma restaurador e regenerativo. Buscou-se investigar como as contratações públicas no Brasil podem superar a dissonância entre o dever constitucional de promover o desenvolvimento sustentável e práticas licitatórias. Para isso, analisou-se a utilização das aquisições estatais para fomentar a economia circular, com fundamento no arcabouço legal e nas melhores práticas. Para tanto, o presente estudo adotou o método dedutivo, pautado na abordagem qualitativa dos dados e documentos observados. Conclui-se que o ordenamento jurídico brasileiro oferece base sólida para a internalização da economia circular nas compras governamentais, embora persistam desafios de ordem cultural, técnica e operacional.

Palavras-chave

contratações públicas — economia circular — economia linear — desenvolvimento sustentável — socioambiental

1. Introduction

For centuries, the logic of the linear economy—defined by resource extraction, mass production, short-term usage, and rapid disposal—has prevailed as the dominant development paradigm. This approach, however, overlooks the biophysical limits of the planet and the finitude of natural resources.

In this critical period of transition, the State, as a primary purchaser and regulator, has huge potential to reshape the economy. Public procurement, which accounts for a significant portion of the GDP, serves as a key mechanism to induce innovative production models and accelerate the shift toward circular, sustainable practices.

This raises the question: how can the Brazilian legal framework—specifically Nova Lei de Licitações e Contratos Administrativos (Law No. 14.133/2021) and related regulations—be interpreted and applied to transform public procurement into a powerful driver of the circular economy, overcoming existing cultural, economic, technical, and operational barriers.

In this context, our aim here is to analyze how procurement in Brazil can be used to promote the transition from a linear consumption paradigm to a circular economy, based on the current legal framework and identified best practices.

To this end, a deductive methodology and qualitative approach was adopted. The qualitative analysis focused on statutory frameworks (Law No. 14.133/2021; the National Solid Waste Policy; and the National Circular Economy Plan), international reports (the Circularity Gap Report 2024; the Global Resources Outlook 2024; and Energy Technology Perspectives 2023), oversight and audit publications (from the Brazilian Federal Court of Accounts - TCU, including its Sustainable Public Procurement Guides), and specialized literature on the intersection of the circular economy and public procurement.

2. Conceptual foundations: from linearity to circularity

2.1 The linear economy: definition, principles and socio-environmental impacts

The linear economy—also known as the processing economy or, pejoratively, the 'waste economy'—is the prevailing global economic model.[4] This model is characterized by a unidirectional value chain, described simply as "extract-produce-use-dispose" (take-make-dispose).[5] The linear paradigm operates on the premise that natural resources and energy supplies are infinite and that the capacity of the planet to absorb waste is unlimited.[6]

The principles governing the linear economy include the promotion, albeit implicitly, of ever-increasing consumption. This is often driven by strategies such as planned obsolescence, the intentional design of products with a limited lifespan to encourage new purchases—and the economic unfeasibility of repair. Disposal is considered the natural end of the product life cycle, with no systemic concern for recovering the value of materials.[7]

The socio-environmental impacts resulting from this paradigm are extensive. The extraction of over 100 billion tons of natural resources per year intensifies the depletion of non-renewable sources. Meanwhile, the global recycling rate is below 10%.[8] Industrial processes account for a significant portion of global greenhouse gas emissions and contribute to air, water, and soil pollution. As these indicators show, this linear framework results in the systemic erosion of economic value and places increasing strain on the biophysical limits of the planet.[9]

THE Circularity Gap Report shows that only 7.2% of all extracted virgin materials return to the economy in a cyclical manner.[10] This system, in which 92% of processed materials are wasted, is patently untenable, given the serious and potentially irreversible economic, social, and environmental risks.[11],[12]

2.2 The Circular Economy: definition, fundamental principles and potential

In contrast to the linear model, the Circular Economy (CE) is a restorative and regenerative system whose objective is to preserve the maximum utility and value of products, components, and materials over time, in terms of technical and biological cycles A Circular Economy (CE) proposes an economic system centered on the continuous circulation of resources, where value creation depends on the retention, recovery, and regeneration of materials. This approach avoids the unnecessary extraction of virgin raw materials and reduces pressure on ecosystems.[13]

The structural principles underpinning the CE—codified by the Ellen MacArthur Foundation and integrated into the National Circular Economy Strategy (ENEC)—[14] encompass: (i) design-led elimination of waste and pollution; (ii) maintenance of products and materials via enhanced durability, repairability, and remanufacturing; and (iii) regeneration of natural systems. These tenets reflect the notion that circularity is not limited to mitigating impacts but involves active restoration of ecological cycles.

The CE also relies on complementary strategies, such as design for circularity, incorporation of renewable energies, extended producer responsibility, industrial symbiosis, and performance-oriented business models, whereby value derives from the service provided, not from ownership of the asset. Together, these approaches reshape production flows and encourage solutions with greater material and energy efficiency.[15]

The socioeconomic benefits inherent in the transition to a circular economy are widely acknowledged. European Union estimates[16] point to the creation of hundreds of thousands of jobs through expansion of high-quality repair, reuse, remanufacturing, and recycling practices. For consumers, circularity yields products that are more durable, innovative, and economically advantageous over time. It also promotes local development and the expansion of production chains linked to green reindustrialization.[17]

A good example of these principles in action is The Future is NEUTRAL, a Renault Group initiative focused on circularity in the automotive industry. Remanufacturing operations significantly reduce their water and energy consumption and decrease waste generation, allowing for the reduction of prices relative to the cost of new products. The example demonstrates the technical and economic feasibility of circular models on an industrial scale.[18]

The shift towards circularity, however, requires structural interventions from the product design phase onwards, as most environmental impacts are defined at the design stage.[19] Policies limited to the final management of waste are proving insufficient. Effective strategies prioritize durable, repairable, demountable, and recyclable goods.[20]

In Brazil, social justice is a central pillar of the National Circular Economy Strategy, based on the idea that the circular model must be an inclusive process that creates quality employment[21]. Employment of recyclable material collectors is a key factor in this regard, preventing circularity from deepening pre-existing inequalities.[22]

Table 1 compares the linear and circular economy models, summarizing their main characteristics and impacts.

Table 1: Comparative chart of linear vs. circular economy

Feature

Linear economy

Circular economy

Material flow

One-way cycle: extract-produce-use-discard.

Cyclical: keep materials in use, regenerate systems.

Main focus

Mass production and consumption, quantitative growth.

Resource optimization, value creation, resilience.

Waste treatment

Disposal as end of cycle, landfilling, incineration.

Minimization, prevention (design), reuse, repair, remanufacturing, high-quality recycling.

Product design

Planned obsolescence, difficulty of repair, focus on low cost.

Durability, repairability, modularity, design for disassembly, use of safe and recyclable materials.

Use of resources

Relies heavily on virgin materials, presumption of abundance.

Resource efficiency, use of renewable energy, secondary raw materials.

Environmental impact

High: resource depletion, pollution, greenhouse gases, loss of biodiversity.

Reduced: resource conservation, lower pollution, climate mitigation, and ecosystem regeneration.

Economic impact

Hidden costs of externalities, commodity price volatility.

New business opportunities, innovation, jobs, long-term cost reduction, supply security.

Social impact

Inequalities, health risks due to pollution.

Potential for skilled jobs, job opportunities (waste collection), improved quality of life.

Examples of principles

Extraction, mass production, consumption, disposal.

Eliminate waste and pollution, circulate products and materials, regenerate biosphere.

Source: Prepared by the author based on the literature.[23]

This comparison of the models reveals the fundamental flaws of a linear economy and the wide-ranging advantages of circularity, attesting to the urgent need for transition and the role public procurement can play in this process.

3. Sustainable public procurement as an instrument of change

Considering its volume and reach, public procurement is a key driver in the transition from a linear to a circular economy. Through the incorporation of sustainability policies, the State can shape the market, stimulate innovation, and promote more responsible production and consumption practices.[24]

3.1 Definition, objectives and dimensions of sustainable public procurement

The objective of Sustainable Public Procurement (SPP) is to minimize the negative social and environmental impacts of government purchasing, balancing cost-effectiveness and the broader goal of sustainable growth.[25] As defined by the Federal Court of Accounts (TCU), SPP is a strategic driver of responsible development, aimed at safeguarding the environment and improving energy efficiency through sustainable production and consumption practices and social inclusion[26].

The dimensions of SPP, as defined by the Federal Court of Accounts[27], mirror the three pillars of sustainability: (i) economic; (ii) environmental; and (iii) social. The State of São Paulo is as a key example of the practical application of SPP at the subnational level. Selo Socioambiental (socio-environmental certifications), established by State Decree 50.170/2005, are awarded to sustainable procurement actions which prioritize resource efficiency—specifically water and energy conservation—waste minimization, raw material optimization, and reduced greenhouse gas emissions As of October 2015, 1,700 practices had received this approval.

5% of goods purchased met the Socio-Environmental standards, and a quarter of all service contracts included green requirements. Notably, 70% of public tenders required suppliers to register with CADMADEIRA, the state legal timber registry. Given the purchasing power of the São Paulo government—estimated at the time as R$ 4 billion for materials, R$ 6 billion for services and R$ 10–15 billion for public works—such outcomes demonstrate the potential impact of SPP; especially given that adoption rates were still low in some sectors.[28]

On a broader scale, federal legislation itself has evolved. The Nova Lei de Licitações consolidated sustainable national development, requiring all administrations to take into account life-cycle costs and environmental impacts in their procurement practices[29].

Internationally, the European Union leads through its green public procurement policy, which establishes criteria to guide member countries. The Netherlands exemplifies this trend with its goal of achieving 100% circular procurement by 2050 through innovative projects such as Furniture as Service (FaaS) contracts, which ensure suppliers are responsible for the entire life cycle of the product.[30]

Public-private partnerships (PPPs) are not just a purchasing method, but a policy tool with the potential to catalyze sustainable development in multiple dimensions.[31] Their effectiveness, however, are intrinsically linked to the ability of the public sector to define clear, measurable, objectively verifiable sustainability criteria without compromising competitiveness[32]. In this context, a mature supplier market capable of meeting demands for sustainable products and services is essential.

Brazilian legislation has steadily evolved to reinforce private health insurance schemes. The Nova Lei de Licitações e Contratos Administrativos establishes "sustainable national development" as a principle and objective of tender processes: a legal imperative for adoption of sustainable practices.[33],[34] However, the law, in and of itself, does not guarantee effective application. Many challenges remain, including the complexity of implementation, initial adaptation costs, and the need for a change in organizational culture, traditionally focused on the lowest price criterion.[35] The transition to more sustainable practices requires an adequate legal framework, investment in training, development of tools, and a change in mindset of both public administrators and the market.[36]

3.2 Synergy between public procurement and promotion of the circular economy

The prevalence of the lowest immediate price model reinforces linearity, favoring goods which have reduced durability, are difficult to repair and expensive to dispose of, shifting environmental and economic externalities not considered in the tender process to later stages of the contract. Incorporation of life cycle cost (LCC) and socio-environmental criteria are important to correct these distortions, factoring in usage, maintenance, energy efficiency, and environmental impacts—highlighting the advantages of practices which, while initially more expensive, are structurally efficient. This is exemplified by the trade-off between cheap, disposable equipment and durable, repairable alternatives, or infrastructure projects that use materials whose higher initial cost is offset by lower maintenance and improved operational performance[37].

Such choices also impact micro and small enterprises (MSEs), which face adaptation costs to meet sustainable specifications, requiring proportionality and capacity building. Thus, by necessitating circularity and environmental performance standards, the State impels the market, inducing productive innovation and reorganizing value chains geared to public efficiency and sustainability. CPS (Competitive Production Systems) integrate durability, reuse, repairability, and innovative business models, based on functionality rather than ownership, promoting the transition from a linear economic model to a circular system, aligned with the principles of sustainability.[38]

Public procurement, guided by circular and sustainable principles, can help redefine production and consumption patterns, promoting market dynamism and more efficient, regenerative practices. We are, indeed, moving beyond the 'lowest-price' model toward an approach that values lifecycle performance, waste minimization, and responsible social and environmental practices[39],[40]

Plano Nacional de Economia Circular (PNEC), an initiative of the Federal Government, acknowledges this synergy, establishing technical guidelines for circular public procurement as a key structural policy. It also requires training of civil servants in the application of these principles in tenders, incorporating criteria such as materials reuse, asset or product life extension and reduction of waste.[41]

In terms of legislation, Nova Lei de Licitações e Contratos Administrativos is a key advance, prescribing “sustainable national development’ as a tenet of the procurement process (Art. 5, XII). It requires the Public Administration to adopt practices that promote the circular economy, without explicitly stipulating the terms[42],[43],[44] Purposive interpretations of the norm, and constitutional principles such as the socio-environmental function of public administration (Art. 225), provide the legal basis for integrating circularity into public procurement.

In this regard, the Ellen MacArthur Foundation, a global leader in circular economy advocacy, promotes procurement as one of the key policy tools for the systematic transition to circularity, along with environmental legislation, tax incentives, and the fostering of technological innovation.[45]

As regards policy programming, the aim of Macro-Objetivo 4.2 of the National Circular Economy Plan (PNEC) is to stimulate the procurement of sustainable products and services. Key initiatives include establishing circularity-driven benchmarks, such as reuse and longevity, along with technical training of key personnel.[46] Action 3.4.2 of the plan encourages adoption of circularity principles in commercial and contractual policies, promoting repair, sharing, resale, remanufacturing and reuse practices. Restrictions on the importation of goods that do not meet these criteria are also prescribed.[47]

4. Procurement mechanisms and strategies for promotion of the circular economy

For public procurement to drive circularity, mechanisms and strategies which translate circularity into concrete requirements and tender processes are required. These range from defining tender criteria to the adoption of innovative business models.

4.1 Incorporation of circularity criteria in tender notices

Including circularity criteria in tender notices is the most direct, essential way to ensure products, services, and projects are aligned with the principles of Conservation and Economics. To be effective and legally correct, these criteria must be formulated objectively, clearly and precisely, to ensure broad competitiveness and avoid undue bias. Proper application will foster the development and provision of more sustainable and circular solutions.[48]

Various circularity criteria may be legally incorporated into bidding procedures, provided they adhere to the principles of legality, impartiality, efficiency, and sustainable national development, as established by Law No. 14.133/2021[49] Adoption must be aligned with the nature of the object of the contract and be expressed in a clear and measurable way, to guarantee broad competitiveness and legal certainty.

A key circularity metric is product longevity, which is enforceable through tender requirements for extended warranty periods, spare part availability for a determined period, and design-for-repair specifications. This measure, besides promoting efficient public spending, reduces premature disposal of goods and encourages development of more robust technological solutions.[50]-[51]

Specifying recycled, renewable, or repurposed content in procurement documents is another widely accepted benchmark. Mandatory inclusion of minimum recycled-content thresholds for items like paper, packaging and furniture, as well as construction aggregates, drives circularity and mitigates the demand for virgin materials.[52]-[53]

Product repairability and modularity are also key. Goods or assets should be designed for easy repair, with individually replaceable or upgradable components, to extend the lifespan and prevent unnecessary waste. Modularity allows for the replacement of only obsolete or damaged parts, reducing operating costs and environmental impact.[54]-[55]

Design for disassembly (DfD) and recyclability criteria require that products are engineered for end-of-life deconstruction. This ensures efficient segregation of component materials, streamlining their reintegration into subsequent value chains. This measure is aligned with the objectives of the National Solid Waste Policy and the guidelines of the PNEC (National Civil Engineering Plan).[56]-[57]

Additionally, the State may mandate a reduction in the use of packaging and ensure sustainability by imposing the use of recyclable, biodegradable, or returnable materials. This approach plays a vital role in mitigating solid waste production across public contracting operations.[58]-[59]

4.2 The utilization of Life Cycle Assessment (LCA) and Life Cycle Costing (LCC)

Life Cycle Assessment (LCA) is a comprehensive framework used to measure the environmental footprint of a product throughout its life cycle. It accounts for every stage, from the initial sourcing of raw materials to manufacturing, logistics, and usage, to final disposal through waste management or circular recovery.[60] This systematic approach is based on a 'cradle-to-grave' or—ideally—a 'cradle-to-cradle' logic. Aligned with principles of circularity, it allows the Public Administration to pinpoint critical environmental impacts, ensuring more targeted and impactful decision-making.[61]

Complementing this, Life Cycle Costing (LCC) is an economic approach that encompasses, in its analytical framework, all costs associated with the useful life of the contracted object, beyond the initial purchase price. This includes expenses related to the consumption of energy, water, and other inputs during the usage phase, as well as the costs of maintenance, operation, and final disposal.[62] Thus, Administration are encouraged to select proposals that, although initially more costly, are more propitious in the long term, in accordance with Article 11 of Law No. 14.133/2021.[63],[64]

Simultaneous or coordinated adoption of LCA and LCC in public procurement has significant benefits. It prevents the shifting of negative externalities between life cycle stages and enables the setting of more rigorous technical specifications, such as mandatory carbon footprint reductions. Furthermore, it can be employed as a scoring or tie-breaking criterion, with higher points given for a lower LCC or reduced environmental impact.[65]

Yet, for all their advantages, practical implementation of such measures is not straightforward. A complete LCA requires complex preliminary studies and access to specialized databases, which are not always available or adaptable to the local context. LCC, meanwhile, entails projections of future costs, which are often uncertain, demanding advanced expertise on the part of contracting entities, posing a barrier for micro and small businesses.[66]

Given these constraints, international best practices point toward the adoption of pragmatic frameworks. For example, since 2018, the Netherlands has mandated the calculation of Environmental Performance of Buildings (MPG)—a monetary index that reflects the environmental impacts of constructions throughout their life cycle. Additionally, it established progressively more rigorous limits for obtaining construction permits. In Germany, meanwhile, the federal government has since 2009 required DGNB certification[67] for all of its new buildings. LCA is a key criterion of the assessment. In Poland, the adoption of sustainable practices is driven by the private market through certifications such as BREEAM.[68] and LEED[69]. These cases demonstrate the technical and legal feasibility of applying LCA methodologies, even in complex administrative contexts. They also show how regulation can promote innovation in materials and designs with low environmental impact.[70]

A key strength of LCC is its ability to internalize environmental and social costs that were traditionally dismissed as externalities. Focusing on Total Cost of Ownership (TCO) instead of the upfront purchase price rewards solutions characterized by longevity and sustainability Products designed to be more efficient and repairable, with reduced input consumption and disposal costs tend to have the lowest LCC, despite the initially higher procurement costs.[71]

Properly institutionalized, these frameworks redefine public sector value and administrative practices. They transform the principle of efficiency into action, promote sustainable development, and position public procurement as a primary driver of the circular economy.[72]

5. The Brazilian legal and regulatory framework for public procurement and the circular economy

The 1988 Federal Constitution established the foundations for this transition. Article 170, VI, in addressing the economic order, grants environmental protection the same normative status as key tenets such as free competition, expressly authorizing differentiated legal treatment for products and services based on their environmental impact. This constitutional provision provides a legal basis for sustainable public procurement practices, including differentiating criteria based on circularity.[73]

Additionally, Article 225 of the Constitution also establishes the duty of the state to preserve an ecologically balanced environment, as a fundamental collective right. Systematic analysis shows a clear commitment to an environmental governance model that goes beyond mere passive protection, including sustainable use of natural resources as the basis for state action.[74]

By instituting shared responsibility for product life cycles and reverse logistics, The National Solid Waste Policy (PNRS) and the National Climate Change Policy (PNMC) are critical levers for the circular economy. They impose a legal duty on the Public Administration to incorporate climate performance into its management processes, specifically targeting greenhouse gas emissions and material efficiency

Such regulations mark a break with the traditional linear logic, based on the "extract-produce-discard" model, guiding the transition to sustainable development based on circularity.[75]-[76]

Nova Lei de Licitações e Contratos Administrativos, meanwhile, introduced the principle of sustainable national development (Art. 5, XII), according to which, selection of the most advantageous proposal must consider, among other aspects, the life cycle of the contractual object (Art. 11, I).[77]

This is a significant step forward, as it institutionalizes life cycle analysis and life cycle costing as mandatory criteria in procurement processes, widely considered fundamental to the implementation of circular economy practices.[78]-[79]

In practical terms, Article 20, § 4, of the law facilitates adoption of socio-environmental criteria as requirements for qualification and judgment, aligning public procurement with the Constitutional Amendment. This represents an expansion of administrative technical discretion, based on solid normative foundations, in line with constitutional principles.[80]

Legal doctrine recognizes government contracting as an institutional tool that harmonizes state actions with constitutional goals. As Bosselmann[81] notes, the principle of sustainability transforms traditional legal logic, as the Public Administration assumes an active role in the regeneration of the ecosystem.

For Atalanio, Ibiapina and Machado,[82] ecological sustainability is not limited to public policy, but represents a new development paradigm requiring a coherent set of regulations and administrative tools grounded in ecological efficiency and social justice. Similarly, Azevedo[83] argues that legal instruments in Brazil already support the integration of circularity through public procurement, emphasizing reverse logistics and life cycle analysis.

According to this view, the Constitution performs a structuring role in Brazilian Administrative Law, uniting the principles of legality and efficiency with broader constitutional commitments, such as environmental conservation and the promotion of social well-being.[84],[85]

Final considerations

The transition from a linear to a circular economy is a pressing but complex challenge, requiring significant reorientation of production, consumption, and, above all, state action. From a legal perspective, the main issue is the apparent tension between the constitutional duty to promote sustainable development and protect the environment, and the persistence of public procurement anchored in the lowest immediate price, which reinforce extractive, waste-generating practices.

Our findings suggest that Brazilian law does not hinder but, rather, provides a comprehensive legal basis for circularity. Enshrining environmental protection in the economic order, the 1988 Constitution provides the value-based framework that requires the State to protect key ecological systems. Nova Lei de Licitações e Contratos Administrativos reinforces this trajectory, promoting 'sustainable national development' as a core principle. By allowing for consideration of life cycles and indirect costs—including environmental—it legitimizes the Total Cost of Ownership (TCO) model.

Internalization of the circular economy in procurement procedures is grounded in legally defensible mechanisms. Tender notices may incorporate circularity criteria—durability, repairability, recycled or renewable content, modularity, design for disassembly, and a preference for remanufactured or refurbished goods—within the scope of technical discretion, provided that motivation, reasonableness, proportionality, and competitiveness are observed. LCA and LCC are complex, but effective tools for ensuring that the "most advantageous offer" goes beyond strictly monetary considerations. Sectoral policies, such as the National Solid Waste Policy and the recent National Circular Economy Plan, provide programmatic guidelines that should guide purchasing processes.

However, legal and administrative challenges persist. Combatting the “lowest price” culture requires a reinterpretation of efficiency with a long-term perspective. Technical expertise is generally lacking vis-a-vis circular procurement specifications, performance of LCA, and oversight of environmental contractual obligations. Hurdles remain: securing legal protection for managers, developing circular supply chains, and ensuring new requirements do not stifle market competition

To leverage procurement as an engine of circularity, the elaboration of sub-statutory regulations, technical manuals, and best-practice guides is essential, to operationalize LCA and LCC methodologies and consolidate standardized contractual language. Oversight bodies, particularly Courts of Auditors, should broaden their instructional role, to disseminate best practices and encourage responsible experimentation. Utilizing the new tender law to implement performance contracts and functionality-based models, such as Product-as-a-Service (PaaS), represents a key strategic advancement.

Hence, the law is not merely an observer, but an essential actor in the transition to a circular economy. Public procurement, supported by a legal and regulatory framework attentive to the imperatives of sustainability, has considerable potential to induce innovation, reshape value chains, and incorporate the principles of circularity into public management. However, the success of this paradigm depends on continuous efforts to improve regulations, institutional capacity and expertise, market engagement, and, above all, the political will to align purchasing power with a prosperous, socially just, and environmentally regenerative future.

References

ATALANIO, Manuella Campos Perdigão e Andrade; IBIAPINA, Helaine Magalhães Medeiros; MACHADO, Thales de Oliveira. A economia circular como modelo de desenvolvimento sustentável. Revista de Direito, Economia e Desenvolvimento Sustentável, Florianópolis, v. 8, n. 1, p. 147-167, 2022.

AZEVEDO, Juliana Laboissière de. A economia circular aplicada no Brasil: uma análise a partir dos instrumentos legais existentes para a logística reversa. In: CONGRESSO NACIONAL DE EXCELÊNCIA EM GESTÃO, 11., 2015, Rio de Janeiro, RJ. Anais […] Rio de Janeiro: UFRJ, 2015. Disponível em: http://www.inovarse.org/sites/default/files/T_15_036M.pdf. Acesso em: 20 maio 2025.

BOSSELMANN, Kai Michael. O princípio da sustentabilidade: transformando direito e governança. São Paulo: Revista dos Tribunais, 2015.

BRASIL. Lei nº 14.133, de 1º de abril de 2021. Lei de Licitações e Contratos Administrativos. Brasília, DF: Presidência da República, 2021. Disponível em: https://www.planalto.gov.br/ccivil_03/_ato2019-2022/2021/lei/l14133.htm. Acesso em: 30 jul. 2025.

BRASIL. Ministério do Desenvolvimento, Indústria, Comércio e Serviços. Plano nacional de economia circular 2025-2034. Disponível em: https://www.gov.br/mdic/pt‑br/assuntos/enec/plano‑nacional/plano‑nacional‑de‑economia‑circular‑2025‑2034.pdf. Acesso em: 20 maio 2025.

BRASIL. Ministério do Planejamento, Orçamento e Gestão. Secretaria de Gestão. Guia prático de compras públicas sustentáveis. 3. ed. Brasília, DF: MPOG; Iclei, 2016. Disponível em: https://www.antt.gov.br/documents/1032899/1033285/Guia+Pr%C3%A1tico+de+Compras+P%C3%BAblicas+Sustent%C3%A1veis.pdf/11ff8f23-63b7-062e-9d21-f4f5a3e144ea?t=1661195657801. Acesso em: 30 jul. 2025.

CASTELAR, Armando (org.). Judiciário e economia no Brasil [online]. Rio de Janeiro: Centro Edelstein de Pesquisas Sociais, 2009.

CIRCLE ECONOMY FOUNDATION. Circularity gap report 2024: a circular economy to live within the safe limits of the planet. Amsterdã: Circle Economy Foundation; Deloitte, 15 jan. 2024. Disponível em: https://reports.circularity-gap.world/cgr-global-2024-37b5f198/CGR+Global+2024+-+Report.pdf. Acesso em: 30 jul. 2025.

DEMARCHI, Mariane Pivetta; GUERCIO, Márcia Júlia; SIERRA, Eliane José da Silva. Desafios à implementação de compras públicas sustentáveis: uma revisão integrativa. In: CONGRESSO INTERNACIONAL DE CONHECIMENTO E INOVAÇÃO, 2022, Monterrey, México. Anais […]. DEUTSCHE GESELLSCHAFT FÜR NACHHALTIGES BAUEN (DGNB). The DGNB system. Stuttgart: DGNB, 2024. Disponível em: https://www.dgnb-system.de/en/system/. Acesso em: 30 jul. 2025.

ECCARD, Wagner Tadeu de Castro. A ordem econômica constitucional à luz da nova economia circular. Dissertação (Mestrado em Direito) — Universidade Federal Fluminense, Rio de Janeiro, 2023.

ELLEN MACARTHUR FOUNDATION. Completing the picture: how the circular economy tackles climate change. Cowes: Ellen MacArthur Foundation, 2019. Disponível em: https://www.ellenmacarthurfoundation.org/completing-the-picture. Acesso em: 30 jul. 2025.

ELLEN MACARTHUR FOUNDATION. Uma economia circular no Brasil: uma abordagem exploratória inicial. Produto da inteligência coletiva dos membros da rede CE100 Brasil. jan. 2017. Disponível em: https://depositorio.wpengine.com/wpcontent/uploads/2021/04/UmaEconomiaCircularnoBrasil.pdf. Acesso em: 20 maio 2025.

EUROPEAN COMMISSION. Green public procurement. Bruxelas: European Commission, 2024. Disponível em: https://environment.ec.europa.eu/topics/circular-economy/green-public-procurement_en. Acesso em: 30 jul. 2025.

FONTGALLAND, Isabela Luciana. Economia circular e consumo sustentável. São Paulo: Amplla, 2022.

GABRIEL, Amanda Priscila de Moura. Barreiras às contratações públicas sustentáveis: a condução do processo de mudança. Latin American Journal of Business Management, v. 13, n. 2, p. 91-104, 2022.

GONÇALVES, Taynara Martins; BARROSO, Ana Flávia da Fonseca. A economia circular como alternativa à economia linear. In: SIMPÓSIO DE ENGENHARIA DE PRODUÇÃO DE SERGIPE, 11., 2019, São Cristóvão, SE. Anais […] São Cristóvão, SE: Universidade Federal de Sergipe, 2019. ISBN/ISSN 2447‑0635. Disponível em: https://ri.ufs.br/jspui/handle/riufs/12561. Acesso em: 20 maio 2025.

INTERNATIONAL ENERGY AGENCY (IEA). Energy Technology Perspectives 2023. Paris: IEA, 2023. Disponível em: https://www.iea.org/reports/energy-technology-perspectives-2023. Acesso em: 30 jul. 2025.

LETT, Laura Alejandra. Las amenazas globales, el reciclaje de resíduos y el concepto de economía circular. Revista Argentina de Microbiología, v. 46, n. 1, p. 1-2, 2014.

LIEDER, Michael; RASHID, Amir. Circular Economy: a literature review of its state-of-the-art and a research agenda. Journal of Cleaner Production, Amsterdam, v. 112, p. 241-253, jan. 2016.

LIEDER, Michael; RASHID, Amir. Towards circular economy implementation: a comprehensive review in context of manufacturing industry. Journal of Cleaner Production, v. 115, p. 36-51, 2016.

MILLAR, Nikki; MCLAUGHLIN, Eleanor; BÖRGER, Thomas. The circular economy: swings and roundabouts? Ecological Economics, v.  158, p.  11-19, abr. 2019. Disponível em: https://www.sciencedirect.com/science/article/abs/pii/S092180091830538X. Acesso em: 20 maio 2025.

MOURA, Ana Maria Magalhães de. As compras públicas sustentáveis e sua evolução no Brasil. Brasília: Ipea, 2013. Disponível em: https://repositorio.ipea.gov.br/handle/11058/5584. Acesso em: 8 jun. 2025.

OLIVEIRA, Fábio Ribeiro de; FRANÇA, Sergio Luiz Braga; RANGEL, Luís Alberto Duncan. Princípios de economia circular para o desenvolvimento de produtos em arranjos produtivos locais. Interações, Campo Grande, v. 20, n. 4, p. 1179-1193, 2019.

ORGANISATION FOR ECONOMIC CO-OPERATION AND DEVELOPMENT (OECD). Global plastics outlook: economic drivers, environmental impacts and policy options. Paris: OECD Publishing, 2022. Disponível em: https://www.oecd.org/environment/global-plastics-outlook-2060.htm. Acesso em: 30 jul. 2025.

PARREIRA, Leandro Schneider Alves; GUIMARÃES, Alexandre Queiroz. Economia circular como alternativa sustentável: uma revisão narrativa do conceito, da sua trajetória e das suas críticas e barreiras. Revista de Desenvolvimento Econômico (RDE), Salvador, a. XXV, n. 54, p. 111-135, jan./dez. 2023. DOI: https://doi.org/10.36810/rde.v1i54.8692.

PIRES, Valdemir. A sustentabilidade nas contratações públicas: da teoria à prática. In: FENILI, Renato (org.). Compras públicas: desafios e perspectivas. Brasília, DF: Enap, 2023. p. 117-133. Disponível em: https://repositorio.enap.gov.br/handle/1/7581. Acesso em: 30 jul. 2025.

RENAULT GROUP. The Future is Neutral: the first circular economy company in the automotive industry operating across the entire value chain. Boulogne-Billancourt: Renault Group, 2022. Press release, 13 out. 2022. Disponível em: https://www.press.renault.co.uk/releases/3012. Acesso em: 30 jul. 2025.

ROSSI, Fernando Luis; LIMA, Igor Thomas da Silva; SILVEIRA, Luciana de Lima; BARBOSA, Robson; SOUZA, Roseane Ferro. Economia circular e políticas públicas: legislação e desafios. Revista de Geopolítica, v. 13, n. 1, p. 95-108, 2021.

SILVA, Fábio Cunha; SHIBAO, Fernando Yamada; KRUGLIANSKAS, Inácio; BARBIERI, José Carlos; SINISGALLI, Pedro Augusto de Almeida. Circular economy: analysis of the implementation of practices in the Brazilian network. Revista de Gestão, v.  26, n.  1, p.  39-60, 2019. Disponível em: https://www.emerald.com/insight/content/doi/10.1108/REGE‑03‑2018‑0044/full/html. Acesso em: 19 maio 2025.

SILVA, Frederico Augusto Barbosa da; ZIVIANI, Paula; GHEZZI, Daniela Ribas. As tecnologias digitais e seus usos. Texto para Discussão nº 2470. Brasília, DF: Ipea, 2019. Disponível em: https://repositorio.ipea.gov.br/bitstream/11058/9293/2/TD_2470_sumex.pdf. Acesso em: 30 jul. 2025.

STICHTING NATIONALE MILIEUDATABASE (NMD). The determination method & the NMD. [Haia]: NMD, 2024. Disponível em: https://milieudatabase.nl/en/determination-method/. Acesso em: 30 jul. 2025.

TOLEDO, Ana Sylvia. A governança nas contratações públicas. Multidebates, v. 8, n. 3, p. 251-264, 2024.

TRIBUNAL DE CONTAS DA UNIÃO (TCU). Licitações & contratos: orientações e jurisprudência do TCU. 4. ed. Brasília, DF: TCU, Secretaria de Gestão de Processos, 2017. Disponível em: https://portal.tcu.gov.br/lumis/portal/file/fileDownload.jsp?fileId=8A81881F7562534C017563A2322C331B. Acesso em: 30 jul. 2025.

UNITED NATIONS (UN). Global resources outlook 2024: Bend the trend — pathways to a liveable planet as resource use spikes. Nairobi: United Nations Environment Programme (Unep), 2024. Disponível em: https://www.unep.org/resources/global-resources-outlook-2024. Acesso em: 30 jul. 2025.

UNITED NATIONS ENVIRONMENT PROGRAMME (Unep). Global methane assessment: benefits and costs of mitigating methane emissions. Nairobi: Unep; Climate and Clean Air Coalition, 2021. Disponível em: https://www.unep.org/resources/report/global-methane-assessment-benefits-and-costs-mitigating-methane-emissions. Acesso em: 30 jul. 2025.

WEETMAN, Catherine. Economia circular: conceitos e estratégias para fazer negócios de forma mais inteligente, sustentável e lucrativa. Belo Horizonte: Autêntica Business, 2019.

XAVIER, Lícia Natália. Reinterpretação conceitual do desenvolvimento sustentável em face do planejamento urbano e da economia circular. Revista de Direito Econômico e Socioambiental, v. 8, n. 1, p. 233-266, 2017.

ZUCCHETTI, Audria; PIRAN, Franciele Silva. A transição da Economia Linear para a Economia Circular: uma análise sob a ótica da sustentabilidade. Revista de Gestão Ambiental e Sustentabilidade (GeAS), São Paulo, v. 8, n. 3, p. 520-538, set./dez. 2019. Disponível em: https://www.geas.org.br/geas/article/view/2932. Acesso em: 30 jul. 2025.

  1. Article received on September 8, 2025 and approved on January 20, 2026. DOI: https://doi.org/10.12660/rda.v285.2026.94292 ↑

  2. Completed postdoctoral research at the Center for Security Studies (CESEG) of the University of Santiago de Compostela, Spain. Ph.D. in State Law (Tax Law subfield) from the Pontifical Catholic University of São Paulo (PUC-SP). LL.M. in Constitutional Law from the Instituto Toledo de Ensino (ITE-Bauru). Visiting Professor in the Graduate Program in Law at the University of Marília (UNIMAR). Attorney for the State of São Paulo since 1994. Country: Brazil. Email: bernardi@unimar.br. ↑

  3. Ph.D. candidate in Constitutional Law at the Brazilian Institute of Education, Development and Research (IDP). LL.M. in Law from UNIMAR. LL.B. from Faculdade Estácio de Teresina (full PROUNI scholarship recipient). Attorney and Chief of Staff to the Mayor of the Municipality of Tuntum (MA). Country: Brazil. Email: felipeepessoa@yahoo.com. ↑

  4. ZUCCHETTI, Audria; PIRAN, Franciele Silva. A transição da Economia Linear para a Economia Circular: uma análise sob a ótica da sustentabilidade. Revista de Gestão Ambiental e Sustentabilidade (GeAS), São Paulo, v. 8, n. 3, p. 520-538, set./dez. 2019. Available at: https://www.geas.org.br/geas/article/view/2932. Accessed on: 30 jul. 2025. ↑

  5. PARREIRA, Leandro Schneider Alves; GUIMARÃES, Alexandre Queiroz. Economia circular como alternativa sustentável: uma revisão narrativa do conceito, da sua trajetória e das suas críticas e barreiras. Revista de Desenvolvimento Econômico (RDE), Salvador, ano XXV, n. 54, p. 111–135, jan./dez. 2023. DOI: https://doi.org/10.36810/rde.v1i54.8692. ↑

  6. MOURA, Ana Maria Magalhães de. As compras públicas sustentáveis e sua evolução no Brasil. Brasília: Ipea, 2022. Available at: https://repositorio.ipea.gov.br/handle/11058/5584. Accessed on: 8 Jun. 2025. ↑

  7. LIEDER, Michael; RASHID, Amir. Towards circular economy implementation: a comprehensive review in context of manufacturing industry. Journal of cleaner production, v. 115, p. 36-51, 2016. ↑

  8. ORGANISATION FOR ECONOMIC CO-OPERATION AND DEVELOPMENT (OECD). Global Plastics Outlook: Economic Drivers, Environmental Impacts and Policy Options. Paris: OECD Publishing, 2022. Available at: https://www.oecd.org/environment/global-plastics-outlook-2060.htm. Accessed on: 30 Jul. 2025. ↑

  9. UNITED NATIONS ENVIRONMENT PROGRAMME (UNEP). Global Methane Assessment: Benefits and Costs of Mitigating Methane Emissions. Nairobi: UNEP and Climate and Clean Air Coalition, 2021. Available at: https://www.unep.org/resources/report/global-methane-assessment-benefits-and-costs-mitigating-methane-emissions. Accessed on: 30 Jul. 2025. ↑

  10. CIRCLE ECONOMY FOUNDATION. Circularity Gap Report 2024: a circular economy to live within the safe limits of the planet. Amsterdam: Circle Economy Foundation; Deloitte, 15 Jan. 2024. Available at: https://reports.circularity-gap.world/cgr-global-2024-37b5f198/CGR+Global+2024+-+Report.pdf. Accessed on: 30 Jul. 2025. ↑

  11. ELLEN MACARTHUR FOUNDATION. Completing the Picture: How the Circular Economy Tackles Climate Change. Cowes: Ellen MacArthur Foundation, 2019. Available at: https://www.ellenmacarthurfoundation.org/completing-the-picture. Accessed on: 30 jul. 2025. ↑

  12. CIRCLE ECONOMY FOUNDATION, op. cit.↑

  13. BRASIL. Ministério do Planejamento, Orçamento e Gestão. Secretaria de Gestão. Guia Prático de Compras Públicas Sustentáveis. 3. ed. Brasília, DF: MPOG; ICLEI, 2016. Available at: https://www.antt.gov.br/documents/1032899/1033285/Guia+Pr%C3%A1tico+de+Compras+P%C3%BAblicas+Sustent%C3%A1veis.pdf/11ff8f23-63b7-062e-9d21-f4f5a3e144ea?t=1661195657801. Accessed on: 30 jul. 2025. ↑

  14. Ibid ↑

  15. OLIVEIRA, Fábio Ribeiro de; FRANÇA, Sergio Luiz Braga; RANGEL, Luís Alberto Duncan. Princípios de economia circular para o desenvolvimento de produtos em arranjos produtivos locais. Interações, v. 20, n. 4, p. 1179-1193, 2019. ↑

  16. CASTELAR, A., ed. Judiciário e economia no Brasil [online]. Rio de Janeiro: Centro Edelstein de Pesquisas Sociais, 2009. 140 p. ISBN: 978-85-7982-019-9. ↑

  17. QUINTANILHA, Alessandro Entrevistado; Cardoso, Jhessica Ribeiro Entrevistador. Entrevista sobre boas práticas em compras públicas sustentáveis com o professor Alessandro Quintanilha. 2017. ↑

  18. RENAULT GROUP. The Future is Neutral: the first circular economy company in the automotive industry operating across the entire value chain. Boulogne-Billancourt: Renault Group, 2022. Press release, October 13. 2022. Available at: https://media.renaultgroup.com/the-future-is-neutral-the-first-circular-economy-company-in-the-automotive-industry-operating-across-the-entire-value-chain/. Accessed on: 30 jul. 2025. ↑

  19. WEETMAN, Catherine. Economia circular: conceitos e estratégias para fazer negócios de forma mais inteligente, sustentável e lucrativa. Belo Horizonte: Authentic Business, 2019. ↑

  20. GONÇALVES, Taynara Martins; BARROSO, Ana Flávia da Fonseca. A economia circular como alternativa à economia linear. In: Simpósio De Engenharia De Produção De Sergipe, 11., 2019, São Cristóvão, SE. Anais [...] São Cristóvão, SE: Universidade Federal de Sergipe, 2019. ISBN/ISSN 2447-0635. Available at: https://ri.ufs.br/jspui/handle/riufs/12561. Accessed on: 20 May 2025 p.17 ↑

  21. CASTELAR, A. (ed.), op. cit.↑

  22. GONÇALVES; BARROSO, op. cit., p. 24 ↑

  23. MOURA, op. cit., p.21. ↑

  24. TRIBUNAL DE CONTAS DA UNIÃO (TCU). Licitações & Contratos: Orientações e Jurisprudência do TCU. 4. ed. Brasília, DF: TCU, Secretariat for Process Management, 2017. Available at: https://portal.tcu.gov.br/lumis/portal/file/fileDownload.jsp?fileId=8A81881F7562534C017563A2322C331B. Accessed on: 30 Jul. 2025. ↑

  25. DE MOURA GABRIEL, Amanda Priscila. Barreiras às contratações públicas sustentáveis: a condução do processo de mudança. Latin American Journal of Business Management, v. 13, n. 2, 2022. ↑

  26. TRIBUNAL DE CONTAS DA UNIÃO (TCU), op. cit., p.11. ↑

  27. TRIBUNAL DE CONTAS DA UNIÃO (TCU), op. cit., p.5. ↑

  28. BRASIL. Ministério do Planejamento, Orçamento e Gestão. Secretaria de Gestão, op. cit., p.9. ↑

  29. BRASIL. Lei nº 14.133, de 1º de abril de 2021. Lei de Licitações e Contratos Administrativos. Brasília, DF: Presidência da República, 2021. Available at: https://www.planalto.gov.br/ccivil_03/_ato2019-2022/2021/lei/l14133.htm. Accessed on: 30 Jul. 2025. ↑

  30. EUROPEAN COMMISSION. Green public procurement. Brussels: EUROPEAN COMMISSION. Available at: https://environment.ec.europa.eu/topics/circular-economy/green-public-procurement_en. Accessed on: 30 Jul. 2025. ↑

  31. TRIBUNAL DE CONTAS DA UNIÃO, op. cit., p. 26 ↑

  32. BRASIL. Ministério do Planejamento, Orçamento e Gestão. Secretaria de Gestão, op. cit., p. 13. ↑

  33. BRAZIL, op. cit.↑

  34. TOLEDO, Ana Sylvia. A governança nas contratações públicas. Multidebates, vol. 8, no. 3, p. 251–264, 2024. ↑

  35. SILVA, Frederico Augusto Barbosa da; ZIVIANI, Paula; GHEZZI, Daniela Ribas. As tecnologias digitais e seus usos. Texto para Discussão nº 2470. Brasília, DF: Ipea, 2022. Available at: https://repositorio.ipea.gov.br/bitstream/11058/9293/2/TD_2470_sumex.pdf. Accessed on: 30 Jul. 2025. ↑

  36. PIRES, Valdemir. A sustentabilidade nas contratações públicas: da teoria à prática. In: FENILI, Renato (ed.). Compras públicas: desafios e perspectivas. Brasília, DF: ENAP, 2023. p. 117-133. Available at: https://repositorio.ucp.pt/handle/10400.14/40695. Accessed on: 30 Jul. 2025. ↑

  37. PARREIRA, Leandro Schneider Alves; GUIMARÃES, Alexandre Queiroz. op. cit.↑

  38. FONTGALLAND, Isabela Luciana. Economia circular e consumo sustentável. São Paulo: Amplla Editora, 2022, p. 16. ↑

  39. MOURA, op. cit., p. 93. ↑

  40. DEMARCHI, Mariane Pivetta; GUERCIO, Márcia Júlia; SIERRA, Eliane José da Silva. Desafios à implementação de compras públicas sustentáveis: uma revisão integrativa. In: Congresso Internacional de Conhecimento e Inovação, 2022. Anais [...], p. 26. ↑

  41. BRASIL. Ministério do Desenvolvimento, Indústria, Comércio e Serviços. Plano Nacional De Economia Circular 2025–2034. Available at: https://www.gov.br/mdic/pt-br/assuntos/enec/plano-nacional/plano-nacional-de-economia-circular-2025-2034.pdf. Accessed on: 13 Mar. 2025. ↑

  42. BRASIL, op. cit., p. 02. ↑

  43. TOLEDO, op. cit. ↑

  44. DE MOURA GABRIEL, op. cit., p. 62. ↑

  45. ELLEN MACARTHUR FOUNDATION. Uma economia circular no Brasil: uma abordagem exploratória inicial. Produto da inteligência coletiva dos membros da rede CE100 Brasil. January 2017. Available at: https://depositorio.wpengine.com/wpcontent/uploads/2021/04/UmaEconomiaCircularnoBrasil.pdf. Accessed on: 20 May 2025 ↑

  46. BRASIL. Ministério do Desenvolvimento, Indústria, Comércio e Serviços, op. cit., p. 11 ↑

  47. BRASIL. Ministério do Desenvolvimento, Indústria, Comércio e Serviços, op. cit., p. 12. ↑

  48. BRASIL. Ministério do Planejamento, Orçamento e Gestão. Secretaria de Gestão, op. cit., p. 22 ↑

  49. BRASIL, op. cit.↑

  50. PARREIRA, Leandro Schneider Alves; GUIMARÃES, Alexandre Queiroz. op. cit.↑

  51. FONTGALLAND, op. cit., p. 11 ↑

  52. ROSSI, Fernando Luis; LIMA, Igor Thomas da Silva; SILVEIRA, Luciana de Lima; BARBOSA, Robson; SOUZA, Roseane Ferro. Economia circular e políticas públicas: legislação e desafios. Revista de Geopolítica, v. 13, n. 1, p. 95–108, 2021. ↑

  53. MOURA, op. cit., p. 09. ↑

  54. GONÇALVES; BARROSO, op. cit., p.13; ↑

  55. DEMARCHI; GUERCIO; SIERRA, op. cit., p. 29. ↑

  56. BRASIL. Ministério do Desenvolvimento, Indústria, Comércio e Serviços, op. cit., p. 81. ↑

  57. LETT, Laura Alejandra. Las amenazas globales, el reciclaje de resíduos y el concepto de economía circular. Revista Argentina de Microbiología, v. 46, n. 1, p. 1–2, 2014, p.57. ↑

  58. FONTGALLAND, op. cit., p.33. ↑

  59. MOURA, op. cit., p. 74. ↑

  60. DE MOURA GABRIEL, op. cit., p. 35. ↑

  61. OLIVEIRA; FRANÇA; RANGEL, op. cit.↑

  62. TRIBUNAL DE CONTAS DA UNIÃO (TCU). Licitações & Contratos: Orientações e Jurisprudência do TCU. 4. ed. Brasília, DF: TCU, Secretaria de Gestão de Processos, 2017. Available at: https://portal.tcu.gov.br/lumis/portal/file/fileDownload.jsp?fileId=8A81881F7562534C017563A2322C331B. Accessed on: 30 Jul. 2025. ↑

  63. BRASIL, op. cit.↑

  64. TOLEDO, op. cit.↑

  65. DE MOURA GABRIEL, op. cit., p. 43. ↑

  66. DEMARCHI; GUERCIO; SIERRA, op. cit., p. 41. ↑

  67. DEUTSCHE GESELLSCHAFT FÜR NACHHALTIGES BAUEN (DGNB). The DGNB System. Stuttgart: DGNB, 2024. Available at: https://www.dgnb-system.de/en/system/. Accessed on: 30 Jul. 2025. ↑

  68. Building Research Establishment Environmental Assessment Method: certificação britânica de sustentabilidade ↑

  69. Leadership in Energy and Environmental Design: certificação norte-americana de sustentabilidade. ↑

  70. STICHTING NATIONAL MILIEUDATABASE (NMD). The Determination Method & the NMD. [Hague]: NMD, 2024. Available at: https://milieudatabase.nl/en/determination-method/. Accessed on: 30 Jul. 2025. ↑

  71. ROSSI et al., op. cit.↑

  72. GONÇALVES; BARROSO, op. cit., p. 75. ↑

  73. ECCARD, Wagner Tadeu de Castro. A ordem econômica constitucional à luz da nova economia circular. 2023. Dissertação (Mestrado em Direito), Universidade Federal Fluminense, Rio de Janeiro, 2023. ↑

  74. XAVIER, Lícia Natália. Reinterpretação conceitual do desenvolvimento sustentável em face do planejamento urbano e da economia circular. Revista de Direito Econômico e Socioambiental, v. 8, n. 1, p. 233–266, 2017. ↑

  75. ATALANIO, Manuella Campos Perdigão e Andrade; IBIAPINA, Helaine Magalhães Medeiros; MACHADO, Thales de Oliveira. A economia circular como modelo de desenvolvimento sustentável. Revista de Direito, Economia e Desenvolvimento Sustentável, v. 8, n. 1, 2022. ↑

  76. BOSSELMANN, Kai Michael. O princípio da sustentabilidade: transformando direito e governança. São Paulo: Revista dos Tribunais, 2015. ↑

  77. BRAZIL, op. cit.↑

  78. SILVA, Fábio Cunha; SHIBAO, Fernando Yamada; KRUGLIANSKAS, Inácio; BARBIERI, José Carlos; SINISGALLI, Pedro Augusto de Almeida. Circular economy: analysis of the implementation of practices in the Brazilian network. Revista de Gestão, v. 26, n. 1, p. 39–60, 2019. Available at: https://www.emerald.com/insight/content/doi/10.1108/REGE-03-2018-0044/full/html. Accessed on: 19 May 2025. ↑

  79. MILLAR, Nikki; MCLAUGHLIN, Eleanor; BÖRGER, Thomas. The circular economy: swings and roundabouts? Ecological Economics, v. 158, p. 11–19, Apr. 2019. Available at: https://www.sciencedirect.com/science/article/abs/pii/S092180091830538X. Accessed on: 20 May 2025. ↑

  80. AZEVEDO, Juliana Laboissière de. A Economia Circular Aplicada no Brasil: uma análise a partir dos instrumentos legais existentes para a logística reversa. In: Congresso Nacional De Excelência Em Gestão, 11., 2015, Rio de Janeiro, RJ. Anais [...] Rio de Janeiro: UFRJ, 2015. Available at: http://www.inovarse.org/sites/default/files/T_15_036M.pdf. Accessed on: 20 May 2025, p 52. ↑

  81. BOSSELMANN, op. cit., p. 65. ↑

  82. ATALANIO; IBIAPINA; MACHADO, op. cit., p. 23. ↑

  83. AZEVEDO, op. cit., p. 55. ↑

  84. XAVIER, op. cit.↑

  85. ECCARD, op. cit., p. 133. ↑